Fragrance Encapsulates: Effect of Polymeric Shell Purification Method on the Accuracy of Biodegradability Testing.

Fragrance encapsulates are widely used in consumer care applications such as fabric softeners or other liquid laundry products; they provide multiple benefits, from fragrance protection in the commercial product to a controlled release and improved sensorial experience for the consumers. Polymeric fragrance encapsulates are in the scope of the EU regulation restricting the use of intentionally added microplastic particles, and industry is actively working on innovation programs to find biodegradable alternatives. However, particular attention needs to be paid to claims that a fragrance encapsulation system is biodegradable, because biodegradation test results can vary considerably depending on how a test material is prepared, which can even lead to false-positive biodegradation test results, as shown in our study. We demonstrate the importance of the sample preparation phase of the process. We show how the biodegradation level can fluctuate from 0% to 91%, depending on how the test material is isolated from a given microcapsule slurry system, and we present a method that can be used to obtain trustworthy biodegradation results. Environ Toxicol Chem 2024;00:1-8. © 2024 Givaudan France SAS. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Multi-laboratory evaluation of the reproducibility of polymer biodegradation assessments applying standardized and modified respirometry methods.

This research evaluated the intra- and interlaboratory variability when applying OECD 301F and OECD 301B Ready Biodegradation respirometric test methods to quantify polymer biodegradation as well as the impact of method modifications including test duration, inoculum level and test substance concentration on results. This assessment synthesizes results of mineralization studies on 5 polymers of varying structural components, molecular weight, charge, and solubility, evaluated at 8 different laboratories in 4 different countries, providing significant geographic variation in inoculum source as well as lab to lab variations in test setup. Across all laboratories, intralaboratory variability was low (≤18 % absolute difference) indicating the reproducibility of results between replicates and uniformity of test setup in each laboratory. Interlaboratory variation was also low for all 5 polymers with extent of mineralization being comparable in all OECD 301F and 301B studies even when test methods were modified. Across all studies mean mineralization was 89 ± 5.5 % for polyethylene glycol 35,000, 85 ± 7.4 % for polyvinyl alcohol 18-88, 44 ± 13 % for carboxymethyl cellulose (DS 0.6), 48 ± 4.1 % for a modified guar gum, and 88 ± 6.2 % for microcrystalline cellulose (MCC) at study completion. Due to the lack of polymeric reference materials, MCC was evaluated and found to be a suitable reference material for polymers that biodegrade rapidly in screening studies. An additional respirometric study was conducted quantifying mineralization of the 5 polymers in river water to evaluate the relationship with OECD 301 results using activated sludge as the inoculum. A similar extent of mineralization was observed for all 5 polymers in the OECD 301 and river water studies but time to reach the maximum extent of mineralization was longer using river water as the inoculum source likely due to the lower microbial counts (106 CFU/L) in the test system.

PeBiToSens™: A Platform for PBT Screening of Fragrance Ingredients Without Animal Testing.

The determination of persistence (P), bioaccumulation (B) and toxicity (T) plays a central role in the environmental assessment of chemicals. Persistence is typically evaluated via standard microbial biodegradation tests. Bioaccumulation refers to the accumulation of chemicals in organisms and is usually assessed in fish exposed to the test chemical. Toxicity is determined at three trophic levels, with fish toxicity as the highest trophic level assessed. Thus, animal tests are classically needed for both B and T assessment. In vitro systems based on fish liver cells or liver S9 fractions ('RT-S9 assay') have been recently adopted by OECD to measure the biotransformation rates for the chemicals for B assessment. Biotransformation drives clearance from the body and reduces bioaccumulation. For T assessment, an assay based on in vitro toxicity on fish gill cells has been established ('RTgill-W1 assay'). Here we summarize our findings indicating that these tests are highly predictive for fragrance ingredients, and show with two case studies of our latest new registered substances how we apply these tests in particular during development and also for chemical registration. This platform of tests (PeBiToSens™) could fully replace animal tests in ecotoxicological assessment and is key in the Givaudan Safe by Design™ approach to develop safer and environmentally compatible novel fragrance ingredients.

Persistency assessment and aerobic biodegradation of selected cyclic sesquiterpenes present in essential oils.

Sesquiterpenes are ubiquitous in essential oils but an assessment of their environmental behavior is still required for their use as components of natural fragrance ingredients and oral care flavors. Persistency plays a key role in hazard and risk assessment, but the current knowledge on the biodegradation of sesquiterpenes in the aquatic environment is limited. This could have important consequences for the persistent, bioaccumulative and toxic (PBT) assessment of essential oils because most of the sesquiterpene components have a log K(OW) of >4.5 and are identified as potentially bioaccumulating according to REACH screening criteria. In the present study, a persistency screening assessment was conducted on 11 cyclic sesquiterpenes selected from 10 different families of sesquiterpenes characterized by their carbon skeleton. Current biodegradation prediction models (BioWin™, BioHCwin, and Catalogic) were found to be of limited use because most of the sesquiterpenes studied were outside the structural domain of the models. Aerobic biodegradation was measured in a standard or prolonged Organisation for Economic Co-operation and Development (OECD) 301F Manometric Respirometry test for ready biodegradability. α-Bisabolol, α-humulene, ß-caryophyllene, α-cedrene, cedrol, longifolene, and δ-cadinene exceeded the pass level of 60% degradation and can be regarded as not persistent. Alpha-gurjunene, himachalenes (α, ß, γ), and (-)-thujopsene almost achieved the pass level reaching between 51% and 56% ultimate biodegradation. Although germacrene D only achieved 24% ultimate biodegradation, specific analysis at the end of the test did indicate complete primary degradation. Given that the shape of the biodegradation curves indicates poor bioavailability and ready biodegradability tests are very stringent, it is expected that all the sesquiterpenes tested in the present study would be degraded under environmental conditions.